Road Studs (Special Applications)
SWAREFLEX CITY STUDS are designed for permanent use, e.g. kerb marking in tunnels, bridges, roundabouts, etc. or to separate bus and taxi lanes. City studs are highly visible at night due to their large number of glass reflector elements.
CITY STUD
Art. 5001 one-way reflective
Art. 5002 two-way reflective
Dimensions: 220 x 100 x 40 mm
Plastic body with 1 x 179 or 2 x 179 glass elements
FT MARKER
Art. 2998 two-way reflective
Art. 2999 one-way reflective
Dimensions: Ø 100 mm x 19 mm
shank length 50 mm, Ø of shank 24 mm
Plastic body with 1 x 5 or 2 x 5 glass elements and plastic shank
CITY STUD „Economy“
Art. 5047 one-way reflective
Art. 5048 two-way reflective
Dimensions: 220 x 100 x 40 mm
Plastic body with 1 x 45 or 2 x 45 glass elements
ROAD STUD
Art. 5005 one-way reflective
Art. 5006 two-way reflective
Dimensions: 220 x 150 x 25 mm
Road stud with 1 x 128 or 2 x 128 glass elements plastic body without slot
CITY STUD WITH SHANK
Art. 5003 one-way reflective
Art. 5004 two-way reflective
Dimensions: 220 x 100 x 40 mm
Plastic body with 1 x 179 or 2 x 179 glass elements and 2 anchoring shanks
SWAREFLEX MINISTAR road studs are used for additional road marking and provide improved guidance, in particular at night or during poor visibility conditions such as fog or rain. For simple installation, you can also order Ministar road studs prepared with butyl adhesive. Butyl adhesive should only be used for temporary marking.
MINISTAR
Art. 3091 one-way reflective
Art. 3092 two-way reflective
Dimensions: 68 x 34 x 9.8 mm
Plastic body with 1 x 8 or 2 x 8 glass elements
MINISTAR
Art. 3091 B one-way reflective
Art. 3092 B two-way reflective with butyl adhesive
Dimensions: 68 x 34 x 9.8 mm
Plastic body with 1 x 8 or 2 x 8 glass elements